Fully automatic electric honing and deglazing machine for restoration of 2-stroke cylinder liner geometry and surface structure.
HON 2A efficiently rectifies the shape of the liner, removes scuffing and restores surface cross pattern. The machine is very easy to operate as it is fully automatic and electrically driven. In addition, it is preassembled, which means that setup-time is significantly reduced.
HON 2A is a fully automatic honing machine for on-site honing of large 2-stroke cylinder liners. The machine is easily operated directly on the engine. With optional holding equipment, the honing machine can be used directly on liners, outside the engine. Honing rectifies the shape of the liner, removes scuffing and restores surface cross pattern.
|Total weight||Approx. 590 kg|
|Air supply||6-9 bar (0.6-0.9 MPa or 85-130 psi), 2l/min|
|Electric power supply||3 phase 380 – 420 V 50/60 Hz|
|Power requirement||3.3 kW|
|Working range||500 – 1000 mm cylinder diameter|
|Noice level||84 dB(A)|
|Honing liquid||Soap water solution al. kerosene, degreaser or light diesel oil|
|Working range||Type P2 8-arms|
|450 – 610 mm||P2 45/61|
|580 – 740 mm||P2 58/74|
|700 – 850 mm||P2 70/85|
|840 – 1000 mm||P2 84/100|
Honing time and stone consumption increase with cylinder diameter and stroke length. It is therefore important to choose the right honing stones. Diamond stones have superior endurance and remove material faster than ceramic stones.
Honing liquid that prevents residues from clogging the honing stones and ensures an efficient honing process.
The unistress piston ring expander makes sure that is is safe and easy to change piston rings.